Fri, 12 Aug 2011, 11:04 AM

Once A Ford Guy.....
|
|
By Bob Frey
Photo copyright 2011 Auto Imagery, Inc.
|

Rob Youngblood
|
When I was growing up, and that was more than a few years ago, if your father drove a certain brand
of car or truck, you would most likely end up driving that same brand in your adult
years. Kids grew up watching their dads drive and work on their Fords became Ford guys and they
wouldn't be caught dead in a Chevrolet. And before I get letters, the same was true for the "Bow
Tie" brigade, that is, if dear old dad bought a new Chevy every year there was a good chance that
you would end up a Chevy guy. People were so loyal to one brand that they even came up with
slogans, like "I'd rather eat worms than drive a (fill in name of car here). You get the idea,
right? In drag racing it's pretty much the same way. Warren Johnson started out in a 1957 Chevrolet
and he has raced General Motors cars throughout his professional career. Allen Johnson loves
Mopars, and he was introduced to them by his father, Roy, who ran a classic 1962 Plymouth many
years ago. Allen, I'm guessing, would rather eat worms than drive, well, anything besides his
Mopar. The same holds true in the sportsman classes, today. Mike Ferderer has always been a GM guy
and the Bogner family has always loved Mopars. And then there's Rob Youngblood. For years Rob could
be found behind the wheel of his classic Ford Mustang, and today, he can be found driving a
Chevrolet. Is nothing sacred anymore?

Youngblood at Sonoma in '09.
|
OK, if the truth be told, Rob actually began his drag racing career with a Chevrolet, and if the
truth be told, it was many years ago and most folks probably don't remember it. "I started racing
in the early 1970's," Rob said. "I had a 1969 Camaro that I ran in a variety of classes." That
variety ranged from B/Stock through the F/Stock class and Rob did most of his racing in and around
his Idaho home. "Pocatello had a drag strip and I ran there and then I'd go down to Salt Lake and
race there, too." Rob ran that Chevy for a few years before he got the car that really earned him
some national attention, a Ford Mustang. "I saw a guy named Mike Graham who had a Mustang and I
really liked it. It had big cylinder heads and I just thought that it had a lot of potential and I
knew that's what I wanted to race. Besides, I always liked Fords." Rob checked around and he found
a car that fitted his requirements perfectly. "It was a 1971 Mustang H.O. It had a Boss 351 engine
and I knew it had a lot of potential." In order to maximize that potential Rob contacted the Lee
Brothers, engine specialists who were based in Canada. "I had heard about them and knew they could
help me get the most out of the car." With the brothers working on the engine, Rob did get the most
from his Ford. It was one of the quickest and fastest cars in the country, he set the national
record with it and it got Rob a lot of national attention. "I met a guy from Isky Cams at one race
and he told me that they were going to make an effort to get into the Stock Eliminator market and
he wanted to know if I was interested in helping. Of course I was and so they sponsored me for a
couple of years." During those years Rob got to travel all over the country and race at tracks that
he had only heard about. "I went to the Gatornationals, Maple Grove, Memphis and a lot of other
tracks in the East and South. It was a lot of fun and I made a lot of friends."

|
All this time Rob was getting a reputation as a guy who had a fast car and who knew how to make
stock class cars run really well. "The Mustang was very fast and I was experimenting with different
things in the clutch department," he said. "It started doing some big wheelstands and everyone
liked it." They liked it so much that he was testing in Tucson one year before the national event
at Firebird Raceway and the car was doing huge wheelies. "The track operator came over and said
that the fans enjoyed it so much that he would like to have me back the next day just to do some
wheelstands. As flattering as that was I told him I had to go to Firebird for the nationals." In
hindsight, maybe he should have stayed in Tucson. "The car was running well and I had some new
things in the clutch and it just took off." And when it came down it was a real mess, but like all
good racers, Rob wasn't down and out for long. "We salvaged some parts of the car and I got in
touch with Carl Downard and we built a new car and we won the first points race we went to with
it." As much as Rob loved that Mustang he eventually parted with it. "A friend of mine wanted the
car and he had a Corvette that he wanted to sell. He kept lowering the price on the 'Vette and it
finally got to the point where it was too good a deal to pass up." That was in 2000 and Rob has
been running the Corvette ever since. "It's an L-82, low compression engine and it's a really good
car. But do I miss the Ford? You bet, and I think if I still had it I could have gone even faster
with it."

The new dual 7" for the SS/ah stick shift hemi cars.
|
One of the reasons why Rob's car runs so well is the work that he puts into the clutches. In fact,
he is so involved with the clutch part of the car that he began his own business a few years ago.
"I was running well and I got a call from Tim Bishop who asked about my program. I told him what I
was doing and he asked if I could help him out and that's kind of how it all started. The business
is called Advanced Clutches. I started it about eight years ago and it's going very well." Over
those eight years Rob has put his electrical engineering degree to good use. "It sounds funny, but
both involve math, and I've taken an approach where I apply some math to the clutch and it works."
He also applies the knowledge that he gets from a wide variety of racers. "I've talked with and
shared ideas with Warren Johnson and other Pro Stock racers. I'm working on clutches for a few Pro
Stock teams right now and I've also done some clutches for a few Pro Stock Motorcycle teams." But
what he would really like to do is get involved with more Competition Eliminator teams. "I have my
stuff in Aaron Strong's car and Brandon Huhtala's and a few others. There is so much potential for
what I can do for those teams. We work on getting the strongest and lightest parts we can and it
works. We're one of the few places that actually has a clutch dyno and we can do things on the dyno
that would really surprise you." Rob says that word of mouth has been his best advertising. "Once
you get your parts in a car that runs well other racers want to know what you can do for them. It's
a real challenge but that's what keeps me going."
Because of business and the overall economy Rob won't do a lot of racing the rest of this year. "I
like to race but we have projects that we're working on and that will keep me close to home." It
will also keep him close to the dyno and the phone. "We're constantly working to improve our
product, and that's what I tell guys when they call." And all the while he continues to race his
Corvette, even though in the back of his mind Rob Youngblood will always be a Ford guy at heart.


NHRA: 10 Most Recent Entries [ top ]
Nov 16- POMONA 2 - Countdown to the Championship Points
Nov 16- POMONA 2 - Final Season Championship Points
Nov 16- POMONA 2 - NHRA All-Star Callout Bonus Points
Nov 16- Langdon, Todd, Glenn and Herrera Clinch World Titles Video
Nov 16- Langdon, Todd, Glenn and Herrera Clinch World Titles at In-N-Out Burger Pomona Dragstrip
Nov 15- POMONA 2 - Sunday Video
Nov 15- POMONA 2 - Sunday Wrap Up
Nov 15- POMONA 2 - Summary of Eliminations in Top Fuel
Nov 15- POMONA 2 - Summary of Eliminations in Funny Car
Nov 15- POMONA 2 - Summary of Eliminations in Pro Stock